TOBO STEEL GROUP CHINA
TOBO GROUP TOBO International Trading(Shanghia)Co.,Ltd Tianda Oil Pipe Co., Ltd TOBO Pipeline Equipment Co.,Ltd TPCO & TISCO Pipe(Tianjin)Co.,Ltd.
Add to Cart
high quality alloy 600 corrugated gaskets
1. Fabricate Full Range of Metal Materials.
2. Flexibility to Adapt and Reinvent.
| Item | high quality alloy 600 corrugated gaskets |
| Material | Stainless Steel, Cold Rolled Steel, Aluminum, Brass, Copper, Gilding, Bronze, Kovar, Glass Sealing Alloys 42,52, NiFe 48, Nickel, Preplated materials such as Electro-Tin, Nickel, Electro-Zinc plated Steels, Titanium, Clad Materials such as Zinc Clad Aluminum. |
| Finish | ver 100 coatings are available in a range of colors, from environmentally friendly organic coatings and rust inhibiting treatments, to IMDS compliant Chrome Free Zinc Plating and Electro-Painting,high quality alloy 600 corrugated gaskets. |
| 2D&3D Design | 1. 3 designers in house. |
| Engineering& Tooling | 1.8 engineers in mold shop. |
| Manufacture | Product Prototype |
| Quality Control | 1.ISO approved. |
| Delivery | 1. JIT develiry. |
| Responsibility | 1.human right |
high quality alloy 600 corrugated gaskets
| Core Material | Max. Temperature |
|
|
| Stainless Steel | 1000-1600°F535-870°C) |
| |
| Carbob Steel | 800°F425°C |
|
|
| Brass | 500°F260°C |
|
|
| Copper | 600°F315°C) |
|
|
| Aluminum | 800°F(425°C |
|
|
| Monel | 1500°F(815°C |
|
|
| Nickel | 1400°F760°C |
|
|
| Inconel | 2000°F1100°C |
| |
| Facing Material | Max. Temperature | Pressure at Room Temp | |
|
|
| Min.Mpa(PSI) | Max.Mpa(PSI) |
| Flexible Graphite | 500°C932°F | 17(2500 | 500(72500) |
| Non-Asbestos Sheet | 400°C752°F | 233300 | 500(72500) |
| PTFE | 260°C500°F | 172500 | 500(72500) |
Metal ring gasket is sealed pressure pipe flange ,an applied to oil and gas pressure vessel, submarine, high-speed joint surface, high temperature and high pressure valve cover joint.There are a variety of materials and in a form suitable for the different design and operational requirements, completely compliance with ANSI B16.20. In the new flat type grooved flange, the common black iron, stainless steel elliptical(Oval) and the octagonal can be used interchangeably. the company can in the most short period of delivery.
Note: the metal ring material hardness selected should be lower than 15~20 HB flange, and the old product is not recommended for repeated use, because the material hardening and damage may occur and the flange or the sealing performance.
Hollow metal O - ring is made of high temperature resistant and no corrosion of stainless steel tube production. It could make holes in the inner or outer of the hollow metal o ring, when the pressure goes up,that self sealing function will work. The o ring with the small holes of the ring, especially the application of pressure over 70kgf/cm ², it can handle more pressure than the basic O type ring. The hollow metal ring based on customer needs, as PTFE plated or silver plating and surface.
| Material | Max Hardness HBS HRB | Max Temperature ℃ | Abbreviation |
| 304 | 160 83 | 700 | 304 |
|---|---|---|---|
| 304L Stainless Steel | 150 80 | 450 | 304L |
| 316 Stainless Steel | 160 83 | 700 | 316 |
| 316L Stainless Steel | 150 80 | 450 | 316L |
| 321 Stainless Steel | 160 83 | 700 | 321 |
| 410 Stainless Steel | 170 86 | 650 | 310 |
| 347 Stainless Steel | 160 83 | 700 | 347 |
| Carbon Steel | -40 -130 | 5401000 | CRS |
