pipe diameter(mm)		pipe length(mm)	wall thickness(mm)	connection thread	trigger slot
inch	mm	pipe length(mm)	wall thickness(mm)	connection thread	trigger slot
3	76	1000-6000	5.00	API2 3/8”REG	57/64.5
3	76	1000-6000	6.00	API2 3/8”REG	57/64.5
3	76	1000-9000	8.00	API2 3/8”REG	57/64.5
3 1/2	89	1000-6000	6.00	API2 3/8”REG	70/64
3 1/2	89	1000-6000	6.00	API2 3/8”REG	70/64
3 1/2	89	1000-9600	8.00	API2 3/8”REG	70/64
3 1/2	89	1000-9600	8.00	API2 3/8”REG	70/64
4	102	1000-9000	8.00	API2 3/7”REG	76/89
4	102	1000-9000	10.00	API2 3/7”REG	76/89
4 1/2	114	1500-7620	6.00	API3 1/2”REG	89/95
4 1/2	114	1500-9140	8.00	API3 1/2”REG	89/95
4 1/2	114	1500-9140	8.00	API3 1/2”REG	89/95
4 1/2	114	1500-9140	10.00	API3 1/2”REG	89/95
4 1/2	114	1500-9140	18.00	API3 1/2”REG	89/95
5	127	1500-9500	10.00	API3 1/2”REG	89
5	127	1500-9500	12.00	API3 1/2”REG	89
5	127	1500-9500	14.00	API3 1/2”REG	89
5	127	1500-9500	18.00	API3 1/2”REG	89
5 1/2	140	1500-9500	9.00	API4 1/2”REG or 4’FH	114
5 1/2	140	1500-9500	10.00	API4 1/2”REG or 4’FH	114
5 1/2	140	1500-9500	12.00	API4 1/2”REG or 4’FH	114

FAQ

Q: Does this tubing come with triclamp ends to be coupled together?A: This particular tubing comes without tri-clamp ends standard. We can always weld tri-clamp ferrules to the end of tubes for any specific length you need. These products are referred to as tri-clamp spool assemblies. If you need a specific length, please
 contact us.
 
Q: Are you able to cut tubing to lengths that don't require freight shipping? Say 5' lengths for example.?
A:Yes, we are able to cut down to other sizes. UPS Ground is able to ship up to 7' without the tubing being considered "oversized".We do charge a cutting fee for this service, however. Please contact us for a quote.
 
Q:How much does 1 stick of 4" tube weigh?
A: One 20' Stick of 4" Sanitary Tubing weighs approximately 75 pounds.
 
Q:You list gauge of this tubing at 16, but the wall thickness at 0.065". Isn't 16 gauge 0.0625"?
A: The wall thickness and gauges are all displayed in the table below. Please contact us if you have any other questions.
 
Q: Do you sell tubing in anything less than cases? I need to order just over 400 feet but don't want to pay for two cases as this is More than I need.
 A:  We do sell tubing on an individual basis however there is a $50 "broken box" fee applied to any order less than an entire case.Since we don't offer a way to order individual tube pieces online please call us to place an order over the phone.
 
Q: Do this product ship via freight?
 A: Yes, our tubing comes in standard 20 foot lengths and will need to ship via freight. I'd also like to mention that there is a broken box charge meaning that if you do not order an entire box of tubing you will be charge additional fees as such. For more information please contact us. Thanks.

DTH Water Well Drill Rod Pipe 76mm For Mining Drilling

Butt Weld Fittings

Stainless Steel Elbow

Stainless Steel Tee

Stainless Steel Reducer

Stainless Steel Pipe Cap

Duplex Stainless Steel Pipe

Stainless Steel Stub Ends

Forged Pipe Fittings

Forged Steel Flanges

API Carbon Steel Pipe

Stainless Steel Seamless Pipe

Stainless Steel Welded Pipe

Nickel Alloy Pipe

Hastelloy Pipe

Copper Nickel Tube

Stainless Steel Plate

Stainless Steel Bars

Spiral Wound Gasket

Cast Acrylic Sheet

DTH Water Well Drill Rod Pipe 76mm For Mining Drilling

drill pipe spec

drilling for water well

3.5 inch drill pipe