 
Inconel 718 is a nickel-chromium-molybdenum alloy designed to resist a wide range of severely corrosive environments, pitting and crevice corrosion. This nickel steel alloy also displays exceptionally high yield, tensile, and creep-rupture properties at high temperatures. This nickel alloy is used from cryogenic temperatures up to long term service at 1200° F. One of the distinguishing features of Inconel 718’s composition is the addition of niobium to permit age hardening which allows annealing and welding without spontaneous hardening during heating and cooling. The addition of niobium acts with the molybdenum to stiffen the alloy’s matrix and provide high strength without a strengthening heat treatment. Other popular nickel-chromium alloys are age hardened through the addition of aluminum and titanium. This nickel steel alloy is readily fabricated and may be welded in either the annealed or precipitation (age) hardened condition. This superalloy is used in a variety of industries such as aerospace, chemical processing, marine engineering, pollution-control equipment, and nuclear reactors. 

Product name	UNS N06601 Nickel Alloy Inconel 601 625 718 Tube Price
Standard	AISI, ASTM, DIN, JIS, BS, NB
Specification	Width: 500~1500mm, Thickness: 0.2~10.0mm, Length: 1200~6000mm
Surface	NO.1, 2B, Hairline, 8K, Diamond Pattern
Used	building industry machinery
Origin	Tisco, baosteel, jiusteel and so on

Surface finish	Characteristics & Application
NO.1	Hot-rolled surface,annealed and pickled,can be used as cold-rolling material,industial tanks and chem i cal devices.
NO.2D	Cold-rolled, an nealed and pick led with out skinpassing the dull prod ucts can be used as auto mo bile parts, building materrials and pipings.
NO.2B	The surface brightness and flatness of NO.2B is better than NO.2D. Then through a special surfacetreament to improve its mechamical properties, N02B could nearly satisfy com pre hen sive uses.
NO.3	Polished with abra sive belt of grit #100#120,have bet ter bright ness with dis con tin u ous coarse stria, used as in ner and exter nal or na ments for building, elec tri cal ap pli anc es and kitchen uten sils etc.
NO.4	Polished with abrasive belt of grit #150#180, have better brightness with discontinuous coarse stria, but thinner than NO.3, are used as bathtud buildinginner and external ornaments electrical appliances, kitchen utensils and food processing equipment etc.
HL	Polished with abrasive belt of grit #150-320 on the No.4 finish and has continuous streaks, mainly used as building ornaments, elevators, door of building, frontal plate etc.
BA	Cold rolled, bright an nealed and skin passed, the prod uct has ex cel lent bright ness and good re flex iv i ty like mirror, used for lectrical appliances, mirror, kitch en apparatus, or na ment ma te ri als etc.

Chemcial Composition (%wt)

Density	8.24 g/cm3
Tensile strength Rm N/mm²	965
Yield strength R P 0. 2N/mm²	550
Elongation (%) Min	30
Melting point	1260-1320°C

Packing

FAQ

Q: Does this tubing come with triclamp ends to be coupled together?A: This particular tubing comes without tri-clamp ends standard. We can always weld tri-clamp ferrules to the end of tubes for any specific length you need. These products are referred to as tri-clamp spool assemblies. If you need a specific length, please
 contact us.
 
Q: Are you able to cut tubing to lengths that don't require freight shipping? Say 5' lengths for example.?
A:Yes, we are able to cut down to other sizes. UPS Ground is able to ship up to 7' without the tubing being considered "oversized".We do charge a cutting fee for this service, however. Please contact us for a quote.
 
Q:How much does 1 stick of 4" tube weigh?
A: One 20' Stick of 4" Sanitary Tubing weighs approximately 75 pounds.
 
Q:You list gauge of this tubing at 16, but the wall thickness at 0.065". Isn't 16 gauge 0.0625"?
A: The wall thickness and gauges are all displayed in the table below. Please contact us if you have any other questions.
 
Q: Do you sell tubing in anything less than cases? I need to order just over 400 feet but don't want to pay for two cases as this is More than I need.
 A:  We do sell tubing on an individual basis however there is a $50 "broken box" fee applied to any order less than an entire case.Since we don't offer a way to order individual tube pieces online please call us to place an order over the phone.
 
Q: Do this product ship via freight?
 A: Yes, our tubing comes in standard 20 foot lengths and will need to ship via freight. I'd also like to mention that there is a broken box charge meaning that if you do not order an entire box of tubing you will be charge additional fees as such. For more information please contact us. Thanks.

High Quality UNS N06601 Nickel Alloy Inconel 601 625 718 Tube Price

Butt Weld Fittings

Stainless Steel Elbow

Stainless Steel Tee

Stainless Steel Reducer

Stainless Steel Pipe Cap

Duplex Stainless Steel Pipe

Stainless Steel Stub Ends

Forged Pipe Fittings

Forged Steel Flanges

API Carbon Steel Pipe

Stainless Steel Seamless Pipe

Stainless Steel Welded Pipe

Nickel Alloy Pipe

Hastelloy Pipe

Copper Nickel Tube

Stainless Steel Plate

Stainless Steel Bars

Spiral Wound Gasket

Cast Acrylic Sheet

High Quality UNS N06601 Nickel Alloy Inconel 601 625 718 Tube Price

inconel 718

lme copper price roday

3.3547 aluminum price

6061 t6 aluminum price