Titanium stub end are critical to the aerospace industry, while also being used in medical, chemical and military hardware, and sporting equipment. Titanium elbow are known for their high strength, low weight, and exceptional corrosion resistance. Despite being as strong as steel, titanium is about 40% lighter in weight. Titanium Fittings is also formidable in its resistance to corrosion by both water and chemical media.

Titanium Stub End
ASTM B381 Titanium Long Stub End	Titanium Short Stub End
Titanium ANSI Short Stub End	ASTM B381 Titanium Long Stub End
ANSI B16.5 Titanium Alloy Long Stub End	ASME SB381 Titanium Short Stub End
ASME SB381 Titanium Short Stub End	Titanium ANSI Long Stub End
ANSI B16.5 Titanium Alloy Long Stub End	ASME SB381 Titanium Short Stub End
ASTM B381 Titanium Short Stub End	Titanium Long Stub End
ASME SB381 Titanium Long Stub End	Titanium ANSI Short Stub End
Titanium Short Stub End	Titanium ANSI Long Stub End
Titanium ANSI Long Stub End	ASTM B381 Titanium Short Stub End

STANDARD	CHEMICAL COMPOSITION (weight %, max or range)
ASTM B363	UNS No	N	C	H	Fe	O
GR 1	R50250	0.03	0.08	0.015	0.2	0.18
GR 2	R50400	0.03	0.08	0.015	0.3	0.25
GR 5	R56400	0.05	0.08	0.015	0.4	0.2
GR 7	R52400	0.03	0.08	0.015	0.3	0.25
GR 12	R53400	0.03	0.08	0.015	0.3	0.25
ASTM B363	UNS No	Al	V	Pd	Mo	Ni
GR 1	R50250
GR 2	R50400
GR 5	R56400	5.5-6.75	3.5-4.5
GR 7	R52400			0.12-0.25
GR 12	R53400				0.2-0.4	0.6-0.9

STANDARD	MECHANICAL PROPERTIES (min)
ASTM B363	Tensile	Yield	El.	Red.
ASTM B363	Mpa	Mpa	%	%
GR 1	240	138	24	30
GR 2	345	275	20	30
GR 7	345	275	20	30
GR 12	483	345	18	25

FAQ

Q: Does this tubing come with triclamp ends to be coupled together?A: This particular tubing comes without tri-clamp ends standard. We can always weld tri-clamp ferrules to the end of tubes for any specific length you need. These products are referred to as tri-clamp spool assemblies. If you need a specific length, please
 contact us.
 
Q: Are you able to cut tubing to lengths that don't require freight shipping? Say 5' lengths for example.?
A:Yes, we are able to cut down to other sizes. UPS Ground is able to ship up to 7' without the tubing being considered "oversized".We do charge a cutting fee for this service, however. Please contact us for a quote.
 
Q:How much does 1 stick of 4" tube weigh?
A: One 20' Stick of 4" Sanitary Tubing weighs approximately 75 pounds.
 
Q:You list gauge of this tubing at 16, but the wall thickness at 0.065". Isn't 16 gauge 0.0625"?
A: The wall thickness and gauges are all displayed in the table below. Please contact us if you have any other questions.
 
Q: Do you sell tubing in anything less than cases? I need to order just over 400 feet but don't want to pay for two cases as this is More than I need.
 A:  We do sell tubing on an individual basis however there is a $50 "broken box" fee applied to any order less than an entire case.Since we don't offer a way to order individual tube pieces online please call us to place an order over the phone.
 
Q: Do this product ship via freight?
 A: Yes, our tubing comes in standard 20 foot lengths and will need to ship via freight. I'd also like to mention that there is a broken box charge meaning that if you do not order an entire box of tubing you will be charge additional fees as such. For more information please contact us. Thanks.

Product Tags:

astm a234 elbow fitting

astm a325 bolt

2107127 9 support ring

Inquiry Cart 0